The Work Light Mounting Bracket # RWLB is for a single bracket. This will allow you to mount a single Light # UCL24CB using the 3/8" mounting hole. If you are mounting more than a single light or a light bar you will need multiple brackets. view full answer...
The Opti-Brite LED Work Light # TLL30FB does not come with a switch, but you can easily add one to the setup. We have a handful of rocker switches here that are illuminated. I recommend choosing one of the following colors for a 12V system:
Blue - # 37213685
Red - # 37212525
Amber - # 37212555
Green - # 37213695 view full answer...
The Optronics LED Transit Tail Light # STL90RB sells as a single light.
Each light has 3 wires, the white wire is the ground wire, red wire is for the stop/turn signals and the black wire powers the running lights.
Deka Heat Shrink Butt Connectors # DW05744-10 are sold as a 10 pack and work great for connecting the wires and providing a weather tight connection. view full answer...
Yes, this Optronics Trailer Light # RVST56 has two bulbs. One for the blinker/tail light functions and another for the reverse light.
Check out the video I put together for you that shows the two different bulbs of this product. view full answer...
Mounting hardware is not included with the Optronics side marker/clearance light # MCL13A2B. The type of hardware you use, screws, bolts, etc., does not matter but screws are most common because they are easy to work with. I have included a link to a video review of this light for you. view full answer...
The Wesbar Left Hand Waterproof Low Profile Tail Light # 271585 that you mentioned does not come with a pigtail for hook up. The pigtail that fits is the 3-wire pigtail # 40-00-003. The right hand low profile tail light is part # 274584 and it does not come with a pigtail either.
The Wesbar Left Hand Waterproof Low Profile Tail Light that comes with a pigtail is # 271585-01 and the right hand tail light is # 274584-01.
These lights use pigtails that are specific to Wesbar LED lights,... view full answer...
The Lamp Out Bypass adapter part # 20142 that you referenced basically just has resistors in it to simulate the load of incandescent bulbs to prevent the lamp out error.
It could be that the resistors you installed on your trailer have enough resistance to get the lights to function properly but not get rid of the error message. view full answer...
The 3 Quick Splices # SWC502905-1 that are included with the LED Combination Tail Light Kit # TLL56RK can be used to tie into any additional side marker lights or clearance lights that may also be on the trailer.
Personally I recommend only using Heat Shrink Butt Connectors # DW05744-5 for all the wiring connections. These will keep out moisture from the connection and protect against corrosion that leads to lights not working properly. view full answer...
The 55-Watt Halogen Area Utility Light # QH16CTS would require you to install a switch as it does not come with one. The part # D16740 would work well as a switch.
The light grounds through the mounting hardware so you would need to run the switch through the power wire. view full answer...
I have confirmed that the EVO Formance Spectra H4 # CM93356 are confirmed as replacement headlight bulbs for your 2000 Nissan Maxima.
Additionally, after speaking with my contacts at EVO, the additional lights that are included with the replacement headlight bulbs are T10 Style bulbs. This style of bulbs are not designed to be used as replacement for OEM fog light bulbs.The T-10 bulbs work great for as any in-dash light bulb replacements, side, marker lights, interior, or license plate... view full answer...
Yes, the center pin on trailer side wiring harness # H20046 is for reverse lights on the trailer. For this particular harness it is the yellow wire. But it will only work if the center pin is functional on your 2012 Toyota Tacoma. If you have the factory installed 7-Way on the Tacoma then it should be active. view full answer...
The replacement mirrors that fit your 2016 Kia Sportage, the K-Source Replacement Side Mirror - Electric w/ Turn Signal - Black - Driver Side # KS75018K and Passenger Side # KS75017K do not have the blind spot indicator light. These mirrors have power electric adjustment and a light on the back for the turn signals, which will work so long as your mirrors have these functions. view full answer...
A ground wire does not come with the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118273 for your 2020 Nissan Pathfinder. You didn't mention using the relays so be sure those are used, and also that they are fully seated, as it can cause the lights not to work if they are not fully seated.
I have added a link below to a video of the # 118273 being installed on a 2020 Nissan Pathfinder for you. view full answer...
The 0.9 Cu Ft Greystone Standard RV Microwave # 324-000106 is designed to sit inside a full cubby area so you'll have to have a separate light and fan like what we see with the RV range hood and lights, like part # FHO23SACRBL.
For a combination of a microwave with a light and fan built-in we have the 1.6 Cu Ft Greystone Over the Range RV Microwave # 324-000135 instead. You'll just have to make sure the 29-7/8" wide x 16-7/8" tall x 18-3/16" deep overall dimensions work well with the space... view full answer...
Westin Sportsman Grille Guard with Winch Plate # 40-93885 includes the grille guard, winch tray, and the appropriate brackets and hardware to install it on a 2016 to 2018 Toyota Tacoma. I have linked the instructions which includes a parts breakdown.
I am sure you could attach a light bar. There won't be room at the winch tray if there is a winch installed but the lower, center bar or upper center bar on the grille guard parts could work for mounting a light bar. view full answer...
You were on the right track with the Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side # TLL160RK, which are a completely sealed light housing so they're waterproof as opposed to submersible lights. These lights do come as bare pigtail wires, but there are twist connectors included in the kit to allow you to make the connections to the trailer wiring.
With that said, when it comes to mixing LED and incandescent lights on your trailer, it... view full answer...
Yes, the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 that you referenced has the wire needed to run to the battery on your 1995 Toyota Corolla to operate the trailer lights.
That wire that is run to the battery keeps the trailer from drawing too much power on the light circuit of your Corolla which could cause issues with your vehicle side lights. The trailer lights will receive power directly from your battery and the wires you splice to your lighting... view full answer...
You'll need to use a circuit tester like # PTW2992 and test each pin on your 7-way as its function is activated. The pin in the 3:00 position should light up when the right turn signal and when the brake pedal is activated. The pin in the 9:00 position should light up with the left turn signal and brake pedal.
I'm guessing when you test, you're not going to get brake signal at those two pins which means that the signal you're getting is unconverted.
To fix things, you'll need to install... view full answer...
Replacement Lens for Ventline Lighted Breeze 360 Bath Fan # VC0392-00 has 3 taps, see picture. But this lens has a diameter of 7.9 inches. If you need one that has a 10 inch diameter then this one will not work. We do not have one that is 10 inches in diameter. view full answer...
Our trailer hitches like the Draw-Tite # 76138, which is a confirmed fit for your 2018 Mazda CX-5, do not come with electrical, but I can point you in the right direction for your Mazda.
I recommend going with the Tekonsha T-One # 118746 which plugs in behind your tail lights and the draws power from the battery on your CX-5 via the 12V power lead. This bypasses the wiring on your CX-5 so that any issues on your trailer to not trickle back to your tow vehicle.
You also need a ball mount... view full answer...
Go To Results